In this article, we’ll cover Communication protocols - You can’t hurt SOC-mas, Mayor Malware! write-up as the Day 24 challenge of the Advent of Cyber event challenge. It involved using Wireshark to analyze MQ Telemetry Transport Protocol (MQTT) on an IoT Smart Device that measures temperature. We’re still at Wareville for SOC-mas!
How Smart is Smart
Smart devices make our lives very easy. We no longer physically need to move and turn on or off a switch to control them. With smart HVAC systems, we can maintain the temperature of our homes and ensure they are not too cold or too hot when we come home from outside. Smart vacuum cleaners can clean our house while we work on other things or go out for dinner. Many smart devices come with apps that allow us to control them using our mobile phones. Even better, since these devices can be controlled remotely through apps and interfaces connected to the Internet, we can make their designs more minimalistic and aesthetically independent, and the need for adding switches or controls on the device itself is minimized.
Is It Smart
While they make our lives easier, most smart devices need a network connection to provide control to the users. Many smart devices are connected over the Internet (hence the term Internet of Things or IoT), which, from a security point of view, means that anyone can potentially take control of these devices. We can limit the exposure of these devices by adding security controls such as network isolation and authentication mechanisms. Still, if we fail to do so, the results can be catastrophic. However, the most secure system is a system that is shut down, but that does not deter us from using different systems to help us out in our daily lives, and the same should be the case with smart devices. Instead, we can ensure that we understand how our smart devices work and have adequate security set up for them.
The Language of IoT
Although different IoT and smart devices use various programming languages, depending on the platform and vendor, they often need to speak the same language to be able to communicate with each other. For example, while IoT devices might use C++ or Java to talk to the compiler and the underlying hardware, they will need a language like HTTP or MQTT to talk with your system or mobile device.
How to Speak MQTT
MQTT stands for Message Queuing Telemetry Transport. It is a language very commonly used in IoT devices for communication purposes. It works on a publish/subscribe model, where any client device can publish messages, and other client devices can subscribe to the messages if they are related to a topic of interest. An MQTT broker connects the different clients, publishing and subscribing to messages.
To further understand MQTT, let’s explore some key concepts used in MQTT protocols.
MQTT Clients: MQTT clients are IoT devices, such as sensors and controllers, that publish or subscribe to messages using the MQTT protocol. For example, a temperature sensor can be a client that publishes temperature sensors at different places. An HVAC controller can also act as a client that subscribes to messages from the temperature sensor and turns the HVAC system on or off based on the input received.
MQTT Broker: An MQTT broker receives messages from publishing clients and distributes them to the subscribing clients based on their preferences.
MQTT Topics: Topics are used to classify the different types of messages. Clients can subscribe to messages based on their topics of interest. For example, a temperature sensor sending temperature readings can use the topic of “room temperature”, while an HVAC controller would subscribe to messages under the topic of “room temperature”. However, a light sensor can publish messages with the topic “light readings”. An HVAC controller does not need to subscribe to this topic. On the other hand, a light controller would subscribe to “light readings” but not to the topic of “room temperature”.
Connecting to the Machine
Before moving forward, review the questions in the connection card shown below:
Click on the green Start Machine button in below to start the virtual machine in split-screen view. If the VM is not visible, use the blue Show Split View button at the top of the page.
Start Machine
Alternatively, you can connect to the machine with a VNC client using the credentials below:
Username: ubuntu
Password: TryHackMe!
Demonstration
Learning about a protocol theoretically can be confusing. Let’s see how it works in practice. The files related to this task are in the ~/Desktop/MQTTSIM/ directory. The walkthrough and the challenge files are shown in the terminal below.
AttackBox Terminal
ubuntu@tryhackme:~/Desktop/MQTTSIM$ tree
.
├── challenge
│ ├── challenge.pcapng
│ ├── challenge.sh
│ └── lights.py
└── walkthrough
├── hvac.py
└── walkthrough.sh
As we discussed, different IoT devices communicate with each other using MQTT, a network protocol. Therefore, we must monitor network communication to see what is going on. We will use Wireshark to monitor network communication. On the left side, we can click the Wireshark logo to start Wireshark. On the home screen, we can select ‘any’ for the network interface to see traffic from all the network interfaces.
The screenshot below shows the traffic from all the interfaces on the network as we have selected 'any' for the network interface.
Since we only want to see traffic from the MQTT protocol, we can filter for this protocol only. To do that, we can type mqtt in the filter box and press enter.
There will be no traffic for now as no MQTT broker or client is running. Let’s start the MQTT broker and client to see the traffic. For that, there is a shortcut for a directory on the Desktop named Link to MQTT. The directory has different scripts in it. We will start the walkthrough.sh script to learn how the MQTT protocol works.
Let’s run the walkthrough.sh script.
AttackBox Terminal
ubuntu@tryhackme:~$ cd Desktop/MQTTSIM/walkthrough/
ubuntu@tryhackme:~/Desktop/MQTTSIM/walkthrough$ ./walkthrough.sh
Starting MQTT broker in Docker...
Starting the HVAC controller script...
All processes started.
ubuntu@tryhackme:~/MQTTSIM$
Once we run it, three windows will pop up. The window with the red text is the MQTT broker, the one with the blue text is the MQTT client, and the third is the application UI we might see as the end user. We can look at the logs on each of these windows if we like, but as an end user, we will only interact with the application UI.
Currently, the application is in automatic mode, the heater is off, the target temperature is 22 degrees, and the current temperature is 22.3 degrees. Let’s head over to Wireshark to see what kind of communication we can see. The below screenshot shows how the communication started.
Note: If you do not see any traffic in Wireshark. Close all windows and restart your steps.
The first two events show the connection establishment, showing the Connect Command and Connect Ack text in the info. The next two events show that one of the clients wants to subscribe to the home/temperature topic, shown in the square brackets. This must be the HVAC controller, which needs to know the temperature to turn the heater on or off. Below, we can see the messages published by different clients, with their topics in the square brackets. The events from the home/temperature topic are from the temperature sensor, and the events from the home/heater are published by the HVAC controller. The screenshot below shows the details of the home/temperature topic message.
In the lower pane, we can see that it is publishing a temperature of -9.6877475608946. That is very cold. Therefore, we see a message from the heater right after the temperature is broadcast. This message shows that the heater was turned on, as seen in the highlighted part in the lower pane.
The illustration below shows the overall communication between the heater controller and the temperature sensor, as we have deduced from Wireshark communication.
Before proceeding to the challenge, quit all the HVAC controller scripts. Use CTRL+C for the window with the red text. It is time to use our knowledge to fix things.
Challenge
Great! Now we understand how the MQTT publish/subscribe model works with a broker. McSkidy can use our help; the lights have gone off in all the major factories and halls. Mayor Malware has sabotaged the lighting system implemented by a contractor company. Their support will take some time to respond, as it is the holiday season. But McSkidy needs to get the lights back on now!
To see what Mayor Malware has done, we can run the script challenge.sh as shown below. This will open three windows, including the lights controller interface.
AttackBox Terminal
ubuntu@tryhackme:~/Desktop/MQTTSIM/walkthrough$ cd ~/Desktop/MQTTSIM/challenge/
ubuntu@tryhackme:~/Desktop/MQTTSIM/challenge$ ./challenge.sh
[...]
We can see the lights controller interface; however, nothing works, and there is no way to turn the lights back on.
Now that we have basic knowledge of the MQTT protocol, we must find the command to turn the lights back on. The challenge.pcapng file is inside the challenge directory. This packet capture file contains various MQTT protocol messages related to turning the lights “on” and “off.” Start Wireshark then go to the File menu, choose Open, locate the challenge.pcapng file, and open it in Wireshark to take a closer look.
You plan to publish a message to the MQTT broker in order to turn on the lights. As a result, all the lighting devices subscribed to this MQTT broker will turn their lights on. You can achieve this from the command line using the mosquitto_pub command. Consider the following example:
mosquitto_pub -h localhost -t "some_topic" -m "message"
We are publishing a message under a specific topic to a broker.
mosquitto_pub is the command-line utility to publish an MQTT message
-h localhost refers to the MQTT broker, which is localhost in this task
-t "some_topic" specifies the topic
-m "message" sets the message, such as "on" and "off"
To determine the correct topic and message to turn on the lights, you must study the captured packets in challenge.pcapng. Once you figure it out, ensure you are running challenge.sh and use mosquitto_pub to publish a message to turn on the lights. Once you successfully manage to turn on the lights, a flag will appear on the lights controller interface.
What is the flag? THM{Ligh75on-day54ved}
If you enjoyed this task, feel free to check out the Wireshark module.
Thank you for reading this article. Please leave a comment with your thoughts, areas for improvement, other suggestions, and questions. Stay secure until the next one!
